Экструдер MB Labs Experimental Extruder
- Артикул/код 900-0004A
- Производитель MakerBot
Экструдер MakerBot Labs Experimental Extruder
Model No. 900-0004A
Model of 3D Printer:
MakerBot Replicator+
MakerBot Replicator Mini+
MakerBot Replicator Desktop 3D Printer (5th Gen)
MakerBot Replicator Mini Compact 3D Printer
MakerBot Replicator Z18
Material:
1.75mm
Refer to MakerBot Labs for Community Created Print Profiles
Required Downloads:
Firmware version 2.6+ and MakerBot Print version 2.7+
The Experimental Extruder unlocks over 35 additional custom print settings in MakerBot Print to allow a user to further tune their prints. These settings are tied to the Experimental Extruder and can only be accessed when connected to a printer that has an Experimental Extruder attached.
Print Technology:
Fused Deposition Modeling
Included Nozzles:
0.4 mm Brass, 0.6 mm Brass, 0.6 mm Stainless Steel, 0.8 mm Brass
Included Accessories:
Two (2) Nozzle Wrenches
Extruder Cap for use with Replicator+ and Replicator Mini+ 3D printers
Active Cooling Duct for use with Replicator+ and Replicator Mini+ 3D printers (ships attached to Experimental Extruder)
Material Swivel Clip for MakerBot Replicator Z18 configuration (ships attached to Experimental Extruder)
Temperature:
100 - 235°C (212 - 455°F)
SIZE & WEIGHT
Shipping Dimensions:
12.7 L X 6.3 W X 17.7 H cm [5 x 2.5 x 7 in]
Shipping Weight:
0.43 kg [0.95 lb]
Model No. 900-0004A
Model of 3D Printer:
MakerBot Replicator+
MakerBot Replicator Mini+
MakerBot Replicator Desktop 3D Printer (5th Gen)
MakerBot Replicator Mini Compact 3D Printer
MakerBot Replicator Z18
Material:
1.75mm
Refer to MakerBot Labs for Community Created Print Profiles
Required Downloads:
Firmware version 2.6+ and MakerBot Print version 2.7+
The Experimental Extruder unlocks over 35 additional custom print settings in MakerBot Print to allow a user to further tune their prints. These settings are tied to the Experimental Extruder and can only be accessed when connected to a printer that has an Experimental Extruder attached.
Print Technology:
Fused Deposition Modeling
Included Nozzles:
0.4 mm Brass, 0.6 mm Brass, 0.6 mm Stainless Steel, 0.8 mm Brass
Included Accessories:
Two (2) Nozzle Wrenches
Extruder Cap for use with Replicator+ and Replicator Mini+ 3D printers
Active Cooling Duct for use with Replicator+ and Replicator Mini+ 3D printers (ships attached to Experimental Extruder)
Material Swivel Clip for MakerBot Replicator Z18 configuration (ships attached to Experimental Extruder)
Temperature:
100 - 235°C (212 - 455°F)
SIZE & WEIGHT
Shipping Dimensions:
12.7 L X 6.3 W X 17.7 H cm [5 x 2.5 x 7 in]
Shipping Weight:
0.43 kg [0.95 lb]
- Артикул/код 900-0004A
- Производитель MakerBot
- Тип товара Прочее
- Технология FDM/FFF
Фирменный магазин 3D-принтеров, 3D-сканеров, материалов для 3D-печати и сопутствующих товаров.
10 лет поставляем оборудование, пластики и запчасти для аддитивного производства.
Выполняем гарантийное обслуживание и сервис командой опытных инженеров.
Сопло латунное Bambu Lab
- Тип товара
- Прочее
- Технология
- FDM/FFF
Диаметр сопла
-
0.4
-
0.6
-
0.8
690 руб.
шт.
Хотэнд для 3D-принтера BIZON
- Производитель
- Noname
- Тип товара
- Прочее
- Технология
- FDM/FFF
Напряжение
-
24V
-
-
3 290 руб.
шт.
Пластик 316L Ultrafuse BASF
- Производитель
- BASF
- Тип товара
- Материал
- Технология
- FDM/FFF
Диаметр нити
-
2.85мм
Цвет fdm-shop.ru
-
серый
Вес нетто
-
3кг
50 000 руб.
шт.
Пластик ePLA-ST ESUN
- Производитель
- Esun
- Тип товара
- Материал
- Технология
- FDM/FFF
Диаметр нити
-
1.75мм
Цвет fdm-shop.ru
-
черный
-
серый
-
натуральный
Вес нетто
-
1кг
2 241.67 руб.
шт.