Пластик eStars-PLA ESUN

Пластик eStars-PLA ESUN.

Светящийся в темноте черный PLA пластик ESUN.

3D PRINTING FILAMENT PLA
Density(g/cm3) 1.2
Heat Distortion Temp(℃,0.45MPa) 53
Melt Flow Index(g/10min) 3.5（190℃/2.16kg）
Tensile Strength(MPa) 72
Elongation at Break(%) 11.8
Flexural Strength(MPa) 90
Flexural Modulus(MPa) 1915
IZOD Impact Strength(kJ/㎡) 5.4
Durability 4/10
Printability 9/10
Recommended printing parameters
Extruder Temperature(℃) 210-230℃
Bed temperature(℃) 45 – 60°C
Fan Speed 100%
Printing Speed 40 – 100mm/s
Heated Bed Optional
Recommended Build Surfaces Masking paper, PVP solid glue, glass board, carbon fiber board, PEI
Feature
Flexible ——
Elastic ——
Impact Resistant ——
Soft ——
Composite ——
 UV Resistant ——
Water Resistant ——
Dissolvable ——
Heat Resistant ——
Chemically Resistant ——
Fatigue Resistant ——
Need drying ——
Heated Bed Required ——
Print recommend ——