Пластик eSilk-PLA Magic ESUN

Пластик eSilk-PLA Magic ESUN.

3D PRINTING FILAMENT eSilk-PLA Magic
Density(g/cm3) 1.256
Heat Distortion Temp(℃,0.45MPa) 54.7
Melt Flow Index(g/10min) 11.32（190℃/2.16kg）
Tensile Strength(MPa) 57.64
Elongation at Break(%) 21.76
Flexural Strength(MPa) 78.70
Flexural Modulus(MPa) 2800.36
IZOD Impact Strength(kJ/㎡) 6.45
Durability 4/10
Printability 9/10
Recommended printing parameters
Extruder Temperature(℃) 190 – 230℃
Recommended temperature：210℃
Bed temperature(℃) 45 – 60°C
Fan Speed 100%
Printing Speed 40 – 100mm/s
Heated Bed Optional
Recommended Build Surfaces Masking paper, PVP solid glue, PEI
Feature
Flexible ——
Elastic ——
Impact Resistant ——
Soft ——
Composite ——
UV Resistant ——
Water Resistant ——
Dissolvable ——
Heat Resistant ——
Chemically Resistant ——
Fatigue Resistant ——
Need drying ——
Heated Bed Required ——
Print recommend ——