Пластик ePA-GF ESUN

Пластик ePA-GF ESUN.

3D PRINTING FILAMENT ePA-GF
Density(g/cm3) 1.35
Heat Distortion Temp(℃,0.45MPa) 120
Melt Flow Index(g/10min) 1.45(220℃/2.16kg）
Tensile Strength(MPa) 76.93
Elongation at Break(%) 21.07
Flexural Strength(MPa) 77.75
Flexural Modulus(MPa) 1714.63
IZOD Impact Strength(kJ/㎡) 14.68
Durability 10/10
Printability 8/10
 
Recommended printing parameters

Extruder Temperature(℃) 260 – 300℃
Recommended temperature：280℃
Bed temperature(℃) 45 – 60°C
Fan Speed 0%
Printing Speed 40 – 100mm/s
Heated Bed Optional
Recommended Build Surfaces Masking paper, PVP solid glue, PEI
Feature
Flexible ——
Elastic ——
Impact Resistant √
Soft ——
Composite √
 UV Resistant ——
Water Resistant ——
Dissolvable ——
Heat Resistant √
Chemically Resistant ——
Fatigue Resistant ——
Need drying √
Heated Bed Required ——
Print recommend Drying at 70℃/>12h, using hardened steel, ruby ​​nozzle