Пластик ePA12 ESUN

Пластик ePA12 ESUN.

3D PRINTING FILAMENT ePA12
Density(g/cm3) 1.012
Heat Distortion Temp(℃,0.45MPa) 100
Melt Flow Index(g/10min) 55.64(270℃/2.16kg)
Tensile Strength(MPa) 50.81
Elongation at Break(%) 165.41
Flexural Strength(MPa) 47.27
Flexural Modulus(MPa) 659.49
IZOD Impact Strength(kJ/㎡) 10.14
Durability 10/10
Printability 8/10
Recommended printing parameters
Extruder Temperature(℃) 260 – 290℃
Recommended temperature：280℃
Bed temperature(℃) 70 – 90°C
Fan Speed 0%
Printing Speed 40 – 100mm/s
Heated Bed Required
Recommended Build Surfaces Solid glue, PEI
Feature
Flexible √
Elastic ——
Impact Resistant √
Soft ——
Composite ——
 UV Resistant ——
Water Resistant ——
Dissolvable ——
Heat Resistant √
Chemically Resistant ——
Fatigue Resistant √
Need drying √
Heated Bed Required √
Print recommend Drying at 70℃/>12h