Пластик ABS Odorless ESUN

Пластик ABS Odorless ESUN (без запаха).

Производится в диаметрах: 1.75мм или 2.85мм.

3D PRINTING FILAMENT ABS Odorless
Density(g/cm3) 1.04
Heat Distortion Temp(℃,0.45MPa) 73
Melt Flow Index(g/10min) 26.7(220℃/10kg）
Tensile Strength(MPa) 46.8
Elongation at Break(%) 24.4
Flexural Strength(MPa) 54.9
Flexural Modulus(MPa) 1234
IZOD Impact Strength(kJ/㎡) 24.3
Durability 8/10
Printability 8/10
 
Recommended printing parameters

Extruder Temperature(℃) 240 – 250℃
Recommended temperature：240℃
Bed temperature(℃) 95 – 110°C
Fan Speed 0 – 15%
Printing Speed 40 – 100mm/s
Heated Bed Required
Recommended Build Surfaces High temperature tape, PVP solid glue
Feature
Flexible ——
Elastic ——
Impact Resistant √
Soft ——
Composite ——
 UV Resistant ——
Water Resistant ——
Dissolvable ——
Heat Resistant √
Chemically Resistant ——
Fatigue Resistant ——
Need drying ——
Heated Bed Required √
Print recommend Minimize the overhang angle structure in the model when print in an enclosed space, and turn on the fan when it needs